PS5 repair service – Sydney
PS5 HDMI Port Repair Sydney
Loose, bent or dead HDMI socket replaced with a new port – soldered at board level.
- 180-day parts and labour warranty
- Most repairs completed same day or within 24 hours
- Free quote – price confirmed before any work starts
- Open 7 days, 9am – 10pm
About PS5 HDMI port repair
The HDMI port is the single most common PS5 failure we see. It sits directly on the main board and takes the strain every time a cable is pulled, bumped or forced in at an angle. Once the pins bend or the solder joints crack, you get flickering, a picture that only works when the cable is held at a certain angle, or no signal at all.
We replace the HDMI socket with a new port under the microscope, re-flow the connection and test the console on a 4K HDR display before it goes back to you. In most cases there is no need for a new console.
Symptoms we fix
- TV shows "No Signal" even though the PS5 powers on
- Picture flickers, cuts out or only works when the cable is wiggled
- HDMI cable feels loose or will not click in
- Bent, pushed-in or missing pins visible inside the port
- Picture lost after the console was knocked while the cable was connected
Common causes
- Cable pulled sideways or tripped over while plugged in
- Console moved or dropped with the HDMI cable still attached
- Repeated plugging and unplugging that wears the socket
- A previous low-quality repair that left weak solder joints
Our HDMI port repair process
New HDMI socket fitted. If pads or traces are torn, we repair those too – see our HDMI pads and trace repair.
- 1
Inspection
We check the port, pins and surrounding board under the microscope and confirm the fault with a signal test.
- 2
Port removal
The old socket is removed with controlled hot air so the pads and traces underneath stay intact.
- 3
New port fitted
A new HDMI socket is aligned, soldered and reinforced, then every pin is checked for continuity.
- 4
Testing
The console is tested on a 4K HDR TV, including resolution switching and HDCP, before it leaves the bench.
PS5 HDMI Port Repair across Sydney
We repair PS5 consoles for customers from these suburbs at our Fairfield Heights workshop.
Fairfield & Cabramatta
Liverpool & South West
Bankstown & Canterbury
Cumberland & Parramatta
Blacktown & North West
Hills District
Ryde & Lower North Shore
Upper North Shore & Hornsby
Penrith & Outer West
Mount Druitt & Western Blacktown
PS5 HDMI Port Repair FAQs
How long does a PS5 HDMI port repair take?
Most HDMI port replacements are finished the same day or within 24 hours. If the board pads are damaged and need rebuilding it can take a little longer – we will tell you up front.
Is it cheaper to repair the HDMI port than buy a new PS5?
Almost always. An HDMI port repair is a fraction of the cost of a new console, and your games, saves and account stay exactly as they were.
Will my data be affected?
No. The repair is to the port on the main board. Your games, saves and settings are untouched.
The port looks fine but I still get no signal – is it still the HDMI port?
Not always. A "no signal" fault can also be the HDMI encoder chip or the display circuit. We test for that as part of the diagnosis and quote the right repair.
Book your HDMI Port Repair today
Call or text us, or drop in to the workshop – 239 The Boulevarde, Fairfield Heights NSW 2165. Open 7 days, 9am – 10pm.